‹ ›

PUBLICATION

Y.Fang, Y.Zhang, M.Kim, J.Suhr, “Micro-layered duplex stainless steel matrix composites with high strength and ductility via laser powder bed fusion”, Optics and Laser Technology, 2025.11

T.Nguyen, M.Zuniga, T.Tran, E.Oh, S.Kang, H.Jeong, J.Suhr, “Polyanionic alginate-regulated hydrogel electrolytes for flexible carbon-based supercapacitors operating in a wide voltage range”, Carbohydrate Polymers, 2025.10.15

Y.Zhang, Y.Fang, H.Jin, Z.Duan, Q.Yuan, J.Suhr, “Optimizing the severe strength-ductility trade-off in additively manufactured Ni-free high-N duplex stainless steels via heterogeneous nanoparticles”, Journal of Materials Processing Technology, 2025.08

H.Cao, J.Yuan, X.Wu, T.Li, L.Wang, J.Suhr, Z.Zhang, “Micron- and nano-sized copper sintering pastes: Materials, processes, and applications”, Materials and Design, 2025.05

S.Lee, B.Yoon, H.Kwon, C.Seo, J.Suhr, “Design Optimization for Minimizing Performance Deviations of Complex Vehicle Door Systems Using Virtual Manufacturing Big Data and Axiomatic Design”, International Journal of Automotive Technology, 2025.05

S.Lee, M.Kim, M.Kim, S.Lee, K.Hong, J.Suhr, “Multidisciplinary tailgate guide bumper design for electric vehicles: Overcoming rattle, separation noise and closure effort trade-offs”, Materials Today Communications, 2025.05

Y.Wang, Z.Cai, F.Liu, X.Wang, D.Li, Y.Ma, Z.Tong, M.Wang, J.Suhr, L.Xiao, S.Jia, X.Chen, “Research on the Geometry Control and Microwave Absorption Performance of Auxetic Materials”, Coatings, 2025.06

P.Rachtanapum, J.Suhr, E.Oh, N.Thajai, T.Kanthiya, K.Kiattipornpithak, K.Kaewapai, S.Photphroet, P.Worajittiphon, N.Tanadchangsaeng, P.Wattanachai, K.Jantanasakulwong, C.Sawangrat, “Flame Retardance and Antistatic Polybutylene Succinate/Polybutylene Adipate-Co-Terephthalate/Magnesium Composite”, Polymers, 2025.05

H.Vothi, C.Kim, V.Le, T.Nguyen, J.Suhr, “Correlation between the initial degradation temperature of organophosphorus-based flame retardants and flame retardancy of polypropylene composites”, Polymer Bulletin, 2025.05

U.Jung, M.Lee, J.Lim, S.Moon, S.Jang, J.Suhr, H.Lee, “Dispersible Amine-Functionalized Boron Nitride Nanotubes for Applications in Extreme Environments Encountered in the Aerospace and Defense Industry”, ACS Applied Nano Materials, 2025.04.25

Y.Fang, M.Kim, Y.Zhang, H.Jin, Z.Duan, Q.Yuan, J.Suhr, “Enhanced strength-ductility synergy in super duplex stainless steel matrix composites with bimodal austenite grains via laser powder bed fusion”, Materials Science and Engineering: A, 2025.04

X.Wang, Z.Cai, Y.Wang, Y.Ma, Z.Tong, M.Wang, J.Suhr, L.Xiao, S.Jia, X.Chenc, “Hollow and solid combined double-shell nitrogen-doped carbon-Fe3C-Fe nanospheres with tunable shell thickness and magnetic component for enhanced electromagnetic wave absorption”, Applied Surface Science, 2025.03.30

C.Sawangrat, K.Jantanasakulwong, J.Suhr, K.Kaewapai, T.Kanthiya, P.Thipchai, P.Rachtanapun, P.Wattanachai, “Synergistic Effects of Dielectric Barrier Discharge Plasma Treatment on Hemp Fiber Surface Modification and Mechanical Properties of Hemp-Fiber-Reinforced Epoxy Composites”, Applied Sciences (Switzerland), 2025.03

Q.Yuan, M.Kim, T.Tien, Y.Fang, Z.Duan, Y.Zhang, J.Suhr, “Investigation of contour-related parameters’ effects on anisotropic mechanical properties and surface roughness of FDM-printed parts”, International Journal of Advanced Manufacturing Technology, 2025.03

H.Sun, U.Hwang, S.Kim, J.Sung, T.Kim, J.Suhr, I.Park, J.Nam, “Reversible Thixotropic Rheological Properties of Graphene-Incorporated Epoxy Inks for Self-Standing 3D Printing”, ACS Macro Letters, 2025.02.18

Y.Fang, Y.Zhang, Z.Duan, Q.Yuan, H.Jin, J.Suhr, “Overcoming the strength-ductility trade-off in additively manufactured super austenitic stainless steel matrix composites via grain boundary engineering and heterogeneous structures”, Materials Science and Engineering: A, 2025.02

U.Hwang, J.Lee, S.Kim, X.Yang, S.Kim, J.Suhr, J.Nam, “Structural Design of Hybrid Fillers in a Polymer Matrix for Advanced Electromagnetic Interference Shielding”, Small Structures, 2025.02

Y.Fang, M.Kim, Y.Zhang, Z.Duan, Q.Yuan, J.Suhr, “Enhanced strength-ductility synergy in additively manufactured micro-laminated duplex stainless steel matrix composites with multiple heterogeneous structures”, Additive Manufacturing,2025.01.25

J.Jung, U.Hwang, J.Kim, I.Park, J.Suhr, J.Nam, “Activated carbon-reinforced polyurethane composite foams with hierarchical porosity for broadband sound absorption”, Journal of Industrial and Engineering Chemistry,2025.01

S.Lee, B.Yoon, H.Kwon,C.Seo, J.Suhr, “Design Optimization for Minimizing Performance Deviations of Complex Vehicle Door Systems Using Virtual Manufacturing Big Data and Axiomatic Design”, International Journal of Automotive Technology,2025.01

H.Vothi, C.Kim, T.Nguyen, J.Lee, L.Nguyen, J.Suhr, “Correlation between the initial degradation temperature of organophosphorus-based flame retardants and flame retardancy of polypropylene composites”, Polymer Bulletin,2025.01

Y.Zhang, Y.Fang, M.Kim, H.Jin, Z.Duan, Q.Yuan, J.Suhr, “Achieving excellent strength-ductility synergy in low-cost duplex stainless steels via laser powder bed fusion and post-heat treatment”,Materials Science and Engineering: A,2025.01

J.Lee,H.Kim, S.Jeong, J.Yang, J.Suhr, J.Jo, B.Koo, “Enhanced lithium-ion battery separators via facile fabrication of sulfonated cellulose nanofiber”, Cellulose,2025.01

Y.H.Kim, M.K.Kim, J.Suhr, T.Lee, “Exploring the Effect of Heat Treatment on the Mechanical Performance of 17-4PH Stainless Steel Specimens Fabricated by Metal Additive Manufacturing”,Experimental Mechanics,2024.10

Y.Alli, H.Anuar, M.Manshor, C.Okafor, A.Mamarulzaman, N.Akcakale, F.Mohd Naxeri, M.Bodaghi, J.Suhr, N.Mohd Nasir, “Optimization of 4D/3D printing via machine learning: A systematic review”, Hybrid Advances,2024.08

B.Yoon, T.Oh, Y.Chang, J.Suhr, “Mechano-Responsive Polymers and Nanocomposites: Recent Advances for Self-Adaptive Structural Applications”,Small,2024.08.07

Z.Duan, Y.Liu, Y.Wang, M.Kim, Y.Fang, Q.Yuan, Y.Zhang, P.Xiong, J.Suhr, “Laser-Induced Controllable Porosity in Additive Manufacturing Boosts Efficiency of Electrocatalytic Water Splitting”, Nano Letters,2024.07.17

E.Oh, M.Godoy, T.Nguyen, B.Kim, T.Tien, J.Suhr, “Sustainable green composite materials in the next-generation mobility industry: review and prospective”, Advanced Composite Materials,2024.05.06

L.Pham, N.Nguyen, D.Nguyen, T.Nguyen, T.Nguyen, J.Suhr,T.Nguyen, M.Rahim, A.Tran-Le, L.Terrei, R.Mehaddi, Y.da Silva, “Effective non-halogen flame-retardants combined with nSiO2 particles to improve thermal stability and fire resistance of high-performance polyurethane nanocomposite foams”, Journal of Materials Science and Technology,2024.12.20

N.Kim, U.Hwang, J.Sung, I.Park, T.Kim, J.Suhr, “Particle size dependence of nanoclustered ceria abrasives on surface activity and chemical mechanical planarization performance”,Applied Surface Science,2024.08

J.Kim, U.Hwang, I.Park, J.Suhr,J.Nam, “Non-combustible polymer composites with extremely high filler loading via polytetrafluoroethylene fibrillation”,Composites Communications,2024.06

Y.Fang,Y.Zhang,M.Kim,T.Kim,Z.Duan,Q.Yuan,J.Suhr, “Multi-scale hybrid reinforced super duplex stainless steel matrix composites with high strength and ductility via laser powder bed fusion and an in-situ synthesis strategy”, Additive Manufacturing,2024.04.25

P.Rachtanapum, C.Sawangrat, T.Kanthiya, P.Thipchai, K.Kaewapai, J.Suhr,P.Worajittiphon, N.Tanadchangsaeng, P.wattanachai, K.Jantanasakulwong, “Effect of Plasma Treatment on Bamboo Fiber-Reinforced Epoxy Composites”, Polymers,2024.04

M.Godoy,R.Ding, E.Oh, T.Nguyen, T.Trung, J.Nam, J.Suhr, “Avocado seed starch utilized in eco-friendly, UV-blocking, and high-barrier polylactic acid (PLA) biocomposites for active food packaging applications”, International Journal of Biological Macromolecules,2024.04

Y.Zhang, Y.Fang, M.Kim, Z.Duan, Q.Yuan, E.Oh, J.Suhr, “In-situ TiCxNy nanoparticle reinforced crack-free CoCrFeNi medium-entropy alloy matrix nanocomposites with high strength and ductility via laser powder bed fusion”, Composites Part B: Engineering,2024.03.15

H.Ji, Y.Ma, Z.Cai, M.Yun, J.Han, Z.Tong, M.Wang, J.Suhr, L.Xiao, S.Jia, X.Chen, “Mesoporous Cobalt Oxide (CoOx) Nanowires with Different Aspect Ratios for High Performance Hybrid Supercapacitors”, Nanomaterials,2024.03

H.Yoon, B.Yoon, S.Cho, T.Oh, J.Suhr, “Plasticizing effect of depolymerized suberin derivatives from natural cork and potato periderm in poly(lactic acid) (PLA) for improved toughness and processability”,Industrial Crops and Products,2024.03

E.Oh, T.Nguyen, B.Yoon, R.Ding, M.Godoy, T.Tien, J.Suhr “Synthesis and Characterization of Bamboo Employed Environmentally Friendly Cellulose Nanofibrils Reinforced Natural Rubber Composites with Uncompromised Mechanical Properties”, Advanced Composite Materials,2024.02

Z.Duan, M.Kim, Y.Fang, Q.Yuan, Y.Zhang, J.Suhr,”Investigation of laser-powder bed fusion driven controllable heterogeneous microstructure and its mechanical properties of martensitic stainless steel”,Materials Science and Engineering: A,2024.01

R.Jing, M.Zuniga, S.Lee, E.Oh, J.Suhr,”pH and temperature responsive UV curable lignin-based hydrogels with controllable and outstanding compressive properties”,Industrial Crops and Products,2023.12.15

U.Jung, Y.Sang Kim, J.Suhr, H.Lee, J.Kim,”Enhancing adhesion strength via synergic effect of atmospheric pressure plasma and silane coupling agent”,Applied Surface Science,2023.12.15

G.Ryu, B.Yoon, J.Shin, C.Rhie, J.Suhr,”Highly efficient and reliable numerical approach for predicting automotive hood displacement: consideration of composite materials and weatherstrip structures”,Functional Composites and Structures,2023.12

S.Lee, B.Yoon, S.Cho, S.Lee, K.Hong, J.Suhr,”Multidisciplinary design of door inner belt weatherstrip for simultaneous reduction of wind noise and squeaking in electric vehicles”,Materials Today Communications,2023.12

T.Nguyen-Ha, T.Nguyen, T.Nguyen, L.Pham, D.Nguyen, D.Nguyen, D.Hoang, E.Oh, J.Suhr,”Novel high-performance sustainable polyurethane nanocomposite foams: Fire resistance, thermal stability, thermal conductivity, and mechanical properties”,Chemical Engineering Journal,2023.10.15

M.Kim,Y.Fang,J.Kim,T.Kim,Y.Zhang,W.Jeong,J.Suhr,”Strategies and Outlook on Metal Matrix Composites Produced Using Laser Powder Bed Fusion: A Review”,Metals,2023.10

T.Kim, M.Kim,Y.Fang,J.Suhr,”Moisture Effects on Qualities and Properties of Laser Powder Bed Fusion (LPBF) Additive Manufacturing of As-Built 17-4PH Stainless Steel Parts”,Metals,2023.09

M.Manshor, Y.Alli, H.Anuar, O.Ejeromedoghene, E.Omotola, J.Suhr,”4D printing: Historical evolution, computational insights and emerging applications”,Materials Science and Engineering: B,2023.09

J.Lee, S.Hong, Y.Sun, S.Lee, U.Hwang, J.Nam, J.Suhr,”Parasitic reaction driven facile preparation of segregated-MXene/polycarbonate nanocomposites for efficient electromagnetic interference shielding”,Surfaces and Interfaces,2023.08

Y.Fang, M.Kim, Y.Zhang,T.Kim,J.No,J.Suhr,”A new grain refinement route for duplex stainless steels: Micro-duplex stainless steel matrix composites processed by laser powder bed fusion”,Materials Science and Engineering: A,2023.08.10

H.Anuar, N.Rahman, M.Manshor, Y.Alli, O.Alimi, F.Alif, J.Suhr,”Novel soda lignin/PLA/EPO biocomposite: A promising and sustainable material for 3D printing filament”,Materials Today Communications,106093,2023.06

Y.Sun, X.Yang, R.Ding, S.Hong,J.Lee, Z.An, M.Wang, Y.Ma, J.Nam, J.Suhr,”Super-elastic and mechanically durable MXene-based nanocomposite aerogels enabled by interfacial engineering with dual crosslinking strategy”,Nano Research,8025 – 8035,2023.05

Z.Cai, Y.Ma,K.Zhao M.Yun, X.Wang, Z.Tong, M.Wang, J.Suhr, L.Xiao, S.Jia, X.Chen,”Ti3C2Tx MXene/graphene oxide/Co3O4 nanorods aerogels with tunable and broadband electromagnetic wave absorption”,Chemical Engineering Journal,142042,2023.04

C.Sawangrat, P.Thipchai, K.Kaewapai, K.Jantanasakulwong, J.Suhr, P.Wattanachai, P.Rachtanapun,”Surface Modification and Mechanical Properties Improvement of Bamboo Fibers Using Dielectric Barrier Discharge Plasma Treatment”,Polymers,2023.04

R.Ding,Z.Duan, Y.Sun, Q.Yuan, T.Tien,M. Zúniga,E.Oh, J. Nam, J.Suhr,”Enhancement of 3D printability and mechanical properties of polylactic acid/lignin biocomposites via interface engineering”,Industrial Crops and Products,116286,2023.04

T.Nguyen, B.Yoon, T.Nguyen, E.Oh, Y.Ma, M.Wang, J.Suhr,”A facile salt-templating synthesis route of bamboo-derived hierarchical porous carbon for supercapacitor applications”,Carbon,383 – 391,2023.03.25

Y.Ma, K.Zhao, J.Han, B.Han, M.Wang, Z.Tong, J.Suhr, L.Xiao, S.Jia, X.Chen,”Pressure Sensor Based on a Lumpily Pyramidal Vertical Graphene Film with a Broad Sensing Range and High Sensitivity”,ACS Applied Materials and Interfaces,13813 – 13821,2023.03.15

Z.Cai, Y.Ma, M.Yun, M.Wang, Z.Tong, J.Suhr, L.Xiao, S.Jia, X.Chen,”Multifunctional MXene/holey graphene films for electromagnetic interference shielding, Joule heating, and photothermal conversion”,Composites Part B: Engineering,110477,2023.02

Y.Chung, U.Hwang, J.Kim, N.Kim, J.Nam, J.Jung, S.Kim, J.Cho, B.Lee, I.Park, J.Suhr,”Amine-Functionalized Lignin as an Eco-Friendly Antioxidant for Rubber Compounds”,ACS Sustainable Chemistry and Engineering,2023.02

H.Vothi, C.Kim, T.Nguyen, J.Lee, L.Nguyen, J.Suhr,”Thermal degradation and flame retardancy of nylon 6/aluminum methylmethoxy phosphonate composites”,RSC Advances,2023.02

H.Ji, Y.Ma, C.Cai, M.Yun, Z.Tong, J.Suhr, M.Wang, L.Xiao, S.Jia, X.Chen,”Mesoporous Cobalt Oxide (CoOx) Nanowires with Different Aspect Ratios for High Performance Hybrid Supercapacitors”,Nanomaterials,2023.02

K.Zhao, J.Han, Y.Ma, Z.Tong, J.Suhr, M.Wang, L.Xiao, S.Jia, X.Chen,”Highly Sensitive and Flexible Capacitive Pressure Sensors Based on Vertical Graphene and Micro-Pyramidal Dielectric Layer”,Nanomaterials,2023.02

M.Seol, U.Hwang, J.Kim, D.Eom, I.Park, H.Kim, J.Suhr,J.Name,”Solution printable multifunctional polymer-based composites for smart electromagnetic interference shielding with tunable frequency and on–off selectivities”,Advanced Composites and Hybrid Materials,2023.02

T.Vo, M.Hossain, J.Lee, J.Suhr, K.Kim,”Crosslinked 3D porous composite foams as adsorbents for efficient organic dye removal”,Environmental Technology and Innovation,102986,2023.02

E.Oh, T.Nguyen, B.Yoon, R.Ding, M.Godoy, T.Tien, J.Suhr,”Synthesis and Characterization of Bamboo Employed Environmentally Friendly Cellulose Nanofibrils Reinforced Natural Rubber Composites with Uncompromised Mechanical Properties”,Advanced Composite Materials,2023.05.11

N.Rahman, H.Anuar, F.Ali,J.Suhr,”Mechanical and Thermal Properties of 3D Printed Polylactic Acid Reinforced Alkaline Lignin with Epoxidized Palm Oil Bio-Composites”,Lecture Notes in Mechanical Engineering,161-167,2023

M.Manshor,A.Kamarulzaman, H.Anuar, S.Toha, F.Ali, N.Sukindar, J.Suhr, N.Haris,”Optimizing Tensile Strength of PLA-Lignin Bio-composites Using Machine Learning Approaches”,Lecture Notes in Mechanical Engineering,437 – 443,2023

B.Lee, U.Hwang, J.Kim, S.Kim, K.Choi, I.Park, C.Choi, J.Suhr,”Highly dispersed graphene nanoplatelets in polypropylene composites by employing high-shear stress for enhanced dielectric properties and frequency-selective electromagnetic interference shielding capability”,Composites Communications,101409,2023.01

M.Godoy, J.Suhr,”Effect of Grafted Biobased Acrylics on the Mechanical Properties of Polylactic Acid (PLA)/Starch Eco-Friendly Composite:,Composites Research,2288-2111,2022

B.Yoon, J.Kim, C.Kang, M.Oh, U.Hong, J.Suhr,”Experimental and numerical investigation on the effect of material models of tire tread composites in rolling tire noise via coupled acoustic-structural finite element analysis”,Advanced Composite Materials,9243046,2022

J.Han, Y.Ma, M.Wang, Z.Tong, J.Suhr, L.Xiao, S.Jia, X.Chen,”Nano-and micro-engineered vertical graphene/Ni for superior optical absorption”,Applied Surface Science,1694332,2022.12

C.Bennett, P.Sojithamporn, W.Thanakulwattana, W.Wattanutchariya, K.Leksakul, W.Nakkiew, K.Jantanasakulwong, P.Rachtanapun,J.Suhr,C.Sawangrat”Optimization of 3D Printing Technology for Fabrication of Dental Crown Prototype Using Plastic Powder and Zirconia Materials”,Materials,19961944,2022.12

C. Kim, J.Lee, H.Yoon, J. Suhr,”High Flame Retardancy and High-strength of Polymer Composites with Synergistically Reinforced MOSw and EG”,Composites Research,359-364,2022.10.31

MS.Pairon, NAA.Rahman, F.Ali,N.Anuar, J.Suhr, “Characterization of dioxane-based and soda-based extraction of lignin from oil palm empty fruit bunches as reinforcement in polylactic acid bio-composite”,Bioresource Technology Reports,2589014X,2022.10

M.-K. Kim, H.-I. Kim, J.-D. Nam, J. Suhr,”Polyamide-nylon 6 particulate polycarbonate composites with outstanding energy-absorbing properties”,Polymer,254-125082,2022.07.21

B. Yoon, S. Kim, A. Lang, C.Egelkamp, J. Meier, U. Giese, B. Kim, J. Kim, J. Bae, G. Um, S. Kim, D. Kim, S. Kim, J. Suhr,”Friction behaviors of rice husk silica-reinforced elastomer composites in contact with rough self-affine surfaces”,Polymer Testing,107764,2022.12

Y. Fang, Y, Zhang, M. Kim, H. Kim, J. No, Z. Duan, Q. Yuan, J. Suhr,”An austenite-rich composite of stainless steels with high strength and favorable ductility via selective laser melting of a powder mixture”,Materials Science and Engineering A,143891,2022.10.10

E. Oh, B.-H. Kim, J. Suhr,”A Trend and Market in Eco-friendly Plasticizers: Review and Prospective”,Composites Research,232-241,2022.08.

J. Lee, J. Suhr,”Electromagnetic Shielding Polymer Composites with Segregated Structure for Automotive Part Application: A Review”,Composites Research,223-231,2022.08

U. Jung, H.-S. Kim, H.-S. Jeong, J. Suhr, T. Kim, H. Lee,”Plasma functionalization of carbon nanotubes and radical penetration mechanism”,Plasma Processes and Polymers,e2200010,2022.04.12

N.-Y. Kim, G. Kim, H. Sun, U. Hwang, J. Kim, D. Kwak, I.-K. Park, T. Kim, J. Suhr, J.-D. Nam,”A nanoclustered ceria abrasives with low crystallinity and high Ce3+/Ce4+ ratio for scratch reduction and high oxide removal rates in the chemical mechanical planarization”,Journal of Materials Science,12318-12328,2022.06.27

S.-H. Cho, B. Yoon, S. K. Lee, J.-D. Nam, J. Suhr,”Natural Cork Suberin-Originated Ecofriendly Biopolyester Syntactic Foam”,ACS Sustainable Chemistry and Engineering,7508-7514,2022.06.13

U. Hwang, J. Kim, N.-Y. Kim, K. Choi, J.-Y. Chung, T. Kim, J. Suhr, J.-D. Nam,”Surface charge control of hierarchical ceria/silica hybrid shells for enhanced dispersion stability”,Applied Surface Science,151173,2022.01.01

Y. Ma, J. Han, Z. Tong, J. Qin, M. Wang, J. Suhr, J.-D. Nam, L. Xiao, S. Jia, X. Chen,”Morphology and surface engineering of vertical graphene films for dye photodegradation”,Nanomaterials,1987,2022.06.02

U. Hwang, B. Lê, B. Oh, H.S. Shin, S. S. Lee, S. Gu. Kang, D. Kim, J. Park, S. Shin, J. Suhr, S.-H. Kim, J.-D. Nam,”Hydrophobic lignin/polyurethane composite foam: An eco-friendly and easily reusable oil sorbent”,European Polymer Journal,110971,2022.02.15.

U. Hwang, J. Kim, M. Seol, B. Lee, I. Park, J. Suhr, J. Nam,”Quantitative Interpretation of Electromagnetic Interference Shielding Efficiency: Is It Really a Wave Absorber or a Reflector?”,ACS OMEGA,4135-4139,2022.01.25

K.-T. Yang, M.-K. Kim, T. Kim, J.-H. Kim, J. Suhr,”Poly(Lactic) Acid Reinforced with Alkaline Lignin Biocomposites Prepared by Thermal Extrusion for Sustainable 3D Printing Process”,Journal of Physics: Conference Series,2129-12003,2021.

Y. Fang, M.-K. Kim, Y. Zhang, Z. Duan, Q. Yuan, J. Suhr,”Particulate-reinforced iron-based metal matrix composites fabricated by selective laser melting: A systematic review”,Journal of Manufacturing Processes,-,2021.12.17

J. Ren, J. Han, Y. Ma, M. Wang, Z. Tong, J. Suhr, L. Xiao, S. Jia, X. Chen,”Morphology and surface engineering of vertical graphene films for dye photodegradation”,Ceramics International,-,2021.12.14

S.Y. Hong, Y. Sun, J. Lee, Y. Ma, M. Wang, J.-D. Nam, J. Suhr,”3D Printing of Free-standing Ti3C2Tx/PEO Architecture for Electromagnetic Interference Shielding”,Polymer,-,2021.10.28

K.-T. Yang, M.-K. Kim, T. Kim, J.-H. Kim, J. Suhr,”Design Optimization of Smartphone Camera Housing Fabricated by Laser Powder Bed Fusion Using Thermal Analysis”,Journal of Mechanical Science and Technology,-,2021.10.19

J. Bae, M.-K. Kim, E. Oh, K.-T. Yang, J. Suhr,”Experimental and numerical investigation of 17–4PH stainless steel fabricated by laser powder bed fusion and hot isostatic pressing”,Materials Research Express,106512,2021.09.29

K. Choi, J.-Y. Chung, I.-K. Park, N.-Y. Kim, J. Suhr, J.-D. Nam,”Capturing Polar and Nonpolar Particles with an Electroadhesive Device Using Interfacial and Orientational Polarization”,ACS Sustainable Chemistry & Engineering,13367-13375,2021.09.21

J.-W. Yoo, J.-W. Lee, S.-H. Kim, Y.-C. Kim, J. Suhr,”GF/PC Composite Filament Design & Optimization of 3D Printing Process and Structure for Manufacturing 3D Printed Electric Vehicle Battery Module Cover”,Composite Research,241-248,2021.08.30

Q. Chen, X. Cao, B. Liu, X. Nie, T. Liang, J. Suhr, L. Ci,”Effects of functional carbon nanodots on water hyacinth response to Cd/Pb stress: Implication for phytoremediation”,Journal of Environmental Management,113624,2021.08.23

J. Kim, U. Hwang, N.-Y. Kim, K. Choi, J.-Y. Chung, I.-K. Park, J. Suhr, T. Kim, J.-D. Nam,”All-Cellulose Paper with High Optical Transmittance and Haze Fabricated via Electrophoretic Deposition”,ACS Sustainable Chemistry and Engineering,11110-11117,2021.08.12

M.-K. Kim, S. Kim, J.-W. Yun, J.-H. Gyun, M.-J. Kwak, Y.-L. Ahn, C.-W. Park, Y.-C. Kim, J. Suhr,”Design and Manufacturing of Mechanical Metamaterials: A Review”,Composite Research,199-211,2021.08.02

M.-K. Kim, T. Kim, J.-W. Kim, D. Kim, Y. Fang, J. No, J. Suhr,”Selective Laser Melting of Metal Matrix Composites: A Review of Materials and Process Design”,Composite Research,212-225,2021.07.09

K.-T. Yang, M.-K. Kim, D. Kim, J. Suhr,”Investigation of laser powder bed fusion manufacturing and post-processing for surface quality of as-built 17–4pH stainless steel”,Surface and Coatings Technology,127492,2021.07.05

B. Yoon, S.-H. Cho, S.K. Lee, K. Cho, C.A. Tabe, U. Giese, J.-D. Nam, J. Suhr”Natural cork/potato periderm derivatives enabled interface engineering of elastomer composites for tunable energy-absorbing capabilities”,Industrial Crops & Products,113763,2021.06.21